Alloy trihull re-styled and nearly ready for sea

Asking AU$780,000

Vessel currently on hard stand – Queensland. Particularly comfortable sea boat – better than a catamaran! The vendor has fabricated and installed a new alloy deck and superstructure, together with all new quality interior.

SKU: 410 Categories: ,

Additional information

Dimensions

(27m x 8.1m x 1.8m)

Built

1996 Barrier Reef Sea Adventures. Rebuilt with brand new alloy superstructure configuration 2014. Original designer – Sirius Designs and Marine Pty Ltd. Current designer – McLeod, New Zealand.

3 x Engines Driving Props

Detroit GM 16/V92 D-DEC3, 1,100 hp. Very low hours on a full rebuild. Max 2,300 rpm. Electronic controls. Plus 2 x Yanmar 170’s driving conventional props and shafts through ZF gearboxes on each side of the outer hull.

Gearbox

ZF, 1.52:1reduction. Propeller: 1.1m diameter, 5 blades.

Shaft

3.5 inch diameter, material – aqua net – mechanical.

Steering gear

Electric, solenoid, hydraulic.

Auto pilot

Com nav Marine 2001.

Fuel

3,000 litres, located midships.

Speed

Advised as max 22 knots – cruise say 20 knots.

Fuel Burn

Approx 30 litres per hour at 9 to 10 knots.

Auxiliaries

Perkins 1006, alternator – Stamford 60 kVA plus 1 x further aux at 16 kVA (both overhauled recently)

Cabins and associated

3x new double cabins plus 1x larger master cabin with ensuite. Main saloon (on main deck level) is very large and suitable 3x full sized lounge suites. Galley. Large 60m² sundeck.

Survey

Vessel has previously been in Australian 1C survey for 70 pax. Vendor estimates that as a ferry, the vessel will probably be certified for up to approx 140 pax.