Additional information
Dimensions | 17m x 5.8m x 1.1m |
---|---|
Built | 1994 by Yamba Welding & Engineering Pty, NSW, Australia. Designed by Tony Laubreau. Marine Grade Alloy hull and decks. Displacement 25T. |
Main engine | 2x Caterpillar 3406B. 460hp each motor. Aux – Westerbeek 7kVa. |
Gearboxes/shafts/propellers | 2x Twin Disc MG5111 gearboxes on 2:1 reductions. 2 x 2.5 inch Aquamet 22HS shafts. 2 x 28” x 36” 5 blade propellers. |
Speeds | Advised as 18 – 19 knots. Fuel consumption @ 1950 rpm with genset approx 167 lph. |
Passenger seating | 54 PAX on main deck. 20 PAX on top deck – fully safety railed, great area to view from. |
Deck area | Fore deck – 126 sq ft Main cabin – 570 sq ft |
Layout | Bar with sink in aft end of the main cabin. The fore deck which has entry through the main cabin forward hatch has standing room for approx 20 passengers only while operating at a slow speed or at anchor. The aft and side decks have access through the main cabin’s three exit doors, with room for about 20 passengers, standing only. |
Electrical system | 240 volt electrical system throughout and shore power running through 3 invertors which act as battery chargers. |
Tankage | 2x fuel tanks – 1,000 litres each – can be increased to a total of 10,000 litres for a long deep sea voyage. Fresh water – 250 litres. Black water – 300 litres. |
Deck equipment | Muir 24V capstan |
Electronics | Codan SSB radio. Cobra VHF plus 3x additional handheld VHFs. 2x Raymarine combination GPS/radar/depth sounder (brand new). 1x Raymarine Autopilot (also new). 1x 24V Clear View. Plastimo compass. Aneroid barometer. Marine clock. |
Air conditioning | Main saloon has 2 x split air conditioner units and the bridge has 1 x split air conditioner unit. |
Sound system | Amplifier / PA system – Yamaha. |
Safety equipment | Fire extinguishers. Fire fighting pump on board plus fire hose reel. |
Survey | Vessel is in current Maritime Safety Authority of Fiji survey. Fiji Class 3B. |
2018/19 vessel upgrades: | • Slip boat and check underside – supply and fit 2 x new shafts, new bearings, new bushes, reposition rudders, props and shafts – supply and fit new zinc blocks – apply quality antifoul paint. |